Bond-it is a PVA emulsion additive designed to blend with all types of concrete and overlays to greatly increase bond strength, tensile strength, and abrasion resistance.

• Increases adhesion by over 50%, flexural strength by 60%, and Tensile Strength by 50%.
• Increased bond strength and flexibility: BOND-IT greatly reduces the occurrence of stress cracks.
• Less damage due to temperature changes: The added flexibility helps to reduce delamination due to lateral movement and shear stresses.

AS A BONDING AGENT: Dilute Bond It 1:1 by volume with water, and use this mixture to bond overlay to existing concretes surfaces. Coat the surface at a rate of 200-500sq.ft. per gallon. Apply wet overlay or concrete over the surface that has been covered with Bond-It. Bond It can become dry and will re-emulsify when it becomes wet again(as in applying an overlay). It is not recommended to be used when applying as part of an overlay mixture because if the overlay is not sealed, this product will re-emulsify.