Primarily used for creating base/skim coats. 

Bond coat provides a permanent bond when applied to properly prepared and cleaned concrete surfaces. It is typically used as a base (bond coat) for other overlay mixes (stamp mix, texture blend, spray mix or other similar finishes).

 Bond coat should still be wet when the overlay mix (typically stamp mix) is applied over it.

Bond coat is applied to the prepared concrete surface prior to applying the overlay mix. Add 50 lb bag of bond coat 1K powder to approximately 5 quarts (minimum 4 maximum 7) of water. Mix in a clean 5 gallon pail with a ½”mixer drill (Do not use a cement mixer) Add EZChem EZ Color Pak (blend the Color Pak into the water first) if integral color is desired. Add half the powdered material to the water, mix until lump free, let sit for 5 minutes, then blend in the other half. Apply with a magic trowel (squeegee), steel trowel, brush, broom or roller Bond coat is applied to a maximum thickness of 1/8”.